1、The process state changes to compensating and a "process compensating" event is produced.
該流程的狀態就會更改為補償中，并且同時會產生“流程補償”事件（42003）。

2、So this paper put forward the optimizing truncation method for compensating this shortage.
因此本文提出了最優截?cái)?a href="/zaoju/115624.htm">方法來補償這個不足。

3、Dynamic Compensating Design Based on PC817A and TL431 in Single Flyback SMP
反激開關電源中基于PC817A與TL431配合的環路動態補償設計

4、Using compensating transactions instead of atomic transactions.
用補償事務代替原子事務。

5、Based on this, the methods for compensating the harmonic wave are discussed.
在此基礎上，對該類系統的諧波補償方法進行了探討。

6、Agile operations can supply compensating controls.
敏捷運維能夠提供補償式的控制。

7、Identifying Method of Hammerstein Model Based on Compensating LS Estimate
Hammerstein模型LS估計補償辨識方法

8、Don't even think of compensating in cash until your venture is spinning off a ton of cash.
在沒有得到大量現金之前，想都別想用現金補償。

9、But what hasn't been clear is how the mechanics of a compensating sense work.
但是平衡的感官是通過怎樣的一個機制運行，卻一直沒有弄清楚補償機能如何運作。

10、the act of compensating for loss or injury.
對過錯和傷害進行補償。

11、With automatic compensating function. it can resist the fluctuation of electrified wire netting.
具有自動補償功能，抗電網波動強。

12、The respondent shall not be liable for compensating the injuries for RST.
答辯人對RST傷害賠償不應承擔責任。

13、A MBS-Based Technique for Compensating Thermal Errors in Machining Centers
基于多體理論模型的加工中心熱誤差補償技術

14、Chirp Compensating Principle of Two-Prisms in CPM FS Dye Laser
碰撞鎖模飛秒染料激光器雙棱鏡啁啾補償原理

15、A Novel Dynamic Compensating Method Based on ANN Inverse System for Sensors
傳感器動態補償?shù)纳窠?jīng)網絡逆系統方法

16、There are, however, compensating factors.
不過，也有一些因素可做補償。

17、The males may be compensating for the fact that they're less attractive to females.
這些雄鼠可以補償這一事實：它們對雌鼠吸引力不夠。

18、The compensating method for MEMS gyroscope random drift error is discussed.
從工程實用的角度出發，探討了MEMS陀螺儀隨機漂移誤差的有效補償方法。

19、And discussing the method compensating position error.
探討了掃描面位置誤差的補償方法。

20、In America, there was no compensating security; it was every man for himself.
美國則不存在代償式的安全；每一個人都是自我的個體。

21、There were some compensating shifts.
其中有一些補償性的轉變。

22、compensating for some fault or defect.
補償某些錯誤或者缺點。

23、On-line modeling, forecasting and compensating way for machining error in boring are introduced.
文章介紹了鏜削加工誤差的在線建模和預報補償控制方法。

24、Calculation for Compensating Error of Stylus Radius of CMM Probe
三坐標測量機測頭的測球半徑補償誤差的計算

25、Otherwise insurance company will not be in charge of compensating for.
否則保險公司將不負責賠償。

26、This paper is mainly on how to remove inaccuracy by compensating the corner radius.
主要討論怎樣用刀尖圓弧半徑補償功能來消除誤差。

compensating翻譯