1、The matching effect can be observed by the fact whether the burr distribution is uniform or not.
通過觀察焊瘤是否具有均勻分布的毛刺特征，可以初步判斷頂鍛參數的匹配效果。

2、This paper describes the use of off-line within the burr removal methods.
本文敘述了采用離線去除內毛刺的方法。

3、Pure white was obtained by entirely effacing the burr and burnishing the plate.
光白部份則把芒刺激完全磨去。

4、Study on the Affection Factors of the Feed-Direction Burr in Turning
車削加工中進給方向毛刺影響因素研究

5、Study on Metal Cutting Burr Formation and Prediction
金屬切削毛刺的形成及預報的研究

6、Present Status of Burr Control and Debarring Process on Mechanical Elements
機械零件毛刺控制及去除工藝現狀

7、Study on Causes and Improvement of Burr in Routing
銑板毛刺的產生原因及對策

8、CAUSE OF BURR FORMATION IN HG5 AND ITS PREVENTION
HG5低碳低硅鋼毛刺缺陷的成因與防止

9、A Equipment for the Elimination of Inner-Wall Burr of Welded Pipe
實用電焊鋼管內毛刺清除裝置

10、On-line Clearance Equip of Burr for High Frequency Weld Steel Tube(ERW)
機械式直縫焊管內毛刺清除裝置

11、To form a burr on
在…上形成毛口

12、A Method of Preparing Burr Nickel Plated Deep Drawn Steel Strip
制備毛刺鍍鎳深沖鋼帶的方法

13、<title>w to Solve the Burr Problem in FPGA Circuit Design
如何解決FPGA電路設計中的毛刺問題

14、Analysis of Machine Tool Motion in Rotary Burr Machining
旋轉銼螺旋刃加工時機床運動的分析

15、A Study on the Leaned Burr Formation in Drilling process
鉆削加工中進給方向毛刺生成機理的研究

16、Ream, burr and size.
刮除毛刺，測量尺寸。

17、Development of the Electricity Chemistry Burr Machine of Gear side
齒輪端面電化學去毛刺機床研制

18、The Affection of Cutting Parameters on the Burr in Precision Machining
精密加工中切削參數對毛刺尺寸的影響

19、Study on burr suppression of cold saw blade
抑制冷鋸鋸片毛刺的研究

20、Limit Change Condition of Forward Burr and Fracture
切削方向毛刺與虧缺的界限轉換條件

21、Forming Mechanism of Tooth Flank Burr in Cutting Gear
齒輪齒形切削加工中的毛刺生成機理

22、Equipment for wide belt grinding to remove the burr of the sheet elements
一種寬砂帶磨削去除薄板零件毛刺的設備

23、Analysis of the Structure of the Burr Masher for Strip Steel
帶鋼壓毛刺機結構評析

24、The winter's forst must rend the burr of the nut before the fruit is seen.
只有冬天的寒霜撕碎了堅果的芒刺，才能看到果實。

25、The Clearance of Hard Burr of Small Modulus Gear in Batches Manufacture
批量加工小模數齒輪硬毛刺的清除

26、DISCUSS OF BURR MECHANISM, SHAPE AND DEBARRING METHOD
毛刺發生機理與形態及去除方法的探討

27、How to treat the burr of maching process
如何對待機械加工過程中的毛刺現象

28、Micro computer Measuring System of Burr and Edge Quatity
毛刺及棱邊質量形貌自動檢測系統

29、The winter's frost must rend the burr of the nut before the fruit is seen.
只要冬天的寒霜撕碎了堅果的芒刺，才能看到果實。

30、Study on the Forming Principle of the Cutting Burr in Turning
車削加工中切削毛刺生成機理的研究

burr翻譯

n. 毛邊, 鉆孔器, 芒刺vt. 發音含混地說話vi. 發音含混地說話【醫】 [牙]鉆, 圓頭銼 詳情