1、The Design of Automobile Engine Idle Speed Based on 80C196KC icroprocessor
基于80C196KC單片機的汽車發動機怠速控制系統設計

2、The purpose of the idle speed control logic is to control engine speed at closed throttle.
怠速轉速控制邏輯是用于控制節氣門關閉后的發動機轉速。

3、If the engine is running in an idle speed too long, spark plug might be serious carbonized.
發動機長時間低速運行，可能導致火花塞積炭嚴重。

4、The Haltech Idle Speed Motor connects via a weatherproof 4 wire connector.
該Haltech怠速電機通過連接線連接器防水4。

5、Idle speed needle, Fully closed before exiting 1.5-1.75 times;
⑤—怠速調節油針，完全關閉（順時針）后退出（逆時針）1.5-1.75 圈；

6、Engine idle speed is no power output of external conditions.
怠速是指發動機對外無功率輸出的工況。

7、The model of engine idle speed is the base of engine control.
發動機怠速模型是發動機怠速控制的基礎。

8、He should also check ignition wires and connections, adjust idle speed and replace PCV valve.
還應檢查點火連線及其接頭，調整空載速度，更換壓力調節閥。

idle speed翻譯