1、This universal joint must be modified to reduce the amount of torsional play.
這種普遍的聯合必須進行修改，以減少播放量扭轉。

2、The purpose of the new design is to provide increased lateral and torsional rigidity.
的目的，新的設計是為了提供更多的橫向和抗扭剛度。

3、In this paper, the VPT was applied to the study on driveline torsional vibration.
本文將虛擬樣機技術應用于汽車傳動系的扭振分析之中。

4、The Effect of the Propeller Fitting Angle on Shafting Torsional Vibration
螺旋槳安裝位置對軸系扭振之影響

5、The base unit scores with an excellent torsional stiffness.
一個出色的扭轉剛度的基礎單元分?jǐn)?shù)與。

6、The state of being twisted into a spiral; torsional stress or strain
螺旋狀，扭力扭成螺旋狀；扭轉的壓力或張力

7、Analysis on the Torsional Strength of Catamaran by Finite Elem ent
有限元分析雙體船扭轉強度

8、From the view point of vibration, powertrain is divided into bending system and torsional system.
從振動的角度看，車輛動力傳動系可分為彎曲振動系統和扭轉振動系統。

9、The torsional flexibility of plate can remarkably enhance the propulsion performance.
平板的扭轉柔效應能顯著改善平板的推進特性。

10、In chapter three, the torsional vibration of the flexible bar was analyzed.
第三章簡要分析了柔性桿的扭轉振動。

11、Torsional vibration of engine crankshaft is an important dynamic problem.
扭轉振動是發動機一個重要的動力問題。

12、The degree or angle of torsional stress.
扭力的強度，扭力的角度

13、The results show that CTLCD is an effective control device on torsional response.
結果表明，環形調液阻尼器是一種有效的扭轉振動控制裝置。

14、The Design Principles and Performa nce Analysis of DMF-CSS Torsional Damper
雙質量飛輪-周向短彈簧型扭振減振器彈性特性設計原理及性能分析

15、STUDY OF SURFACE TORSIONAL ANCHORING IN TN AND STN LC CELL
在TN和STN盒中表面錨定的研究(英文)

16、Now one more very interesting oscillation — a torsional pendulum.
現在是一個更有趣的擺動-，一個扭擺。

17、Here is the pendulum, the torsional pendulum.
這是擺，這里是扭擺。

18、The state of being twisted into a spiral; torsional stress or strain.
螺旋狀，扭力扭成螺旋狀；扭轉的壓力或張力

19、The variation on torque is the very cause of torsional vibration.
扭矩的這種變化即是塔架產生扭轉振動的原因。

20、Torsional Stiffness of Bellows
波紋管抗扭剛度的計算

21、The torsional moment of transmission shaft and power of electric motor are reduced by the method.
此方法可降低傳動軸上所受的扭矩，減少了電動機的功率。

22、the shear stiffness 242.5N/mm,the torsional stiffness 6.5Nm/deg.
剪切剛度是245N／mm； 扭轉剛度是6．5Nm／degree；

torsional翻譯

a. 扭力的, 扭轉的【機】 扭轉的 詳情