1、The Intelligent Filling Control System Based on CAN Bus for Oily Materials
基于CAN總線的智能油料灌裝控制系統

2、Reliability of fault tolerant control system with Markovian parameters
帶馬爾可夫參數容錯控制系統的可靠性分析

3、Design and realization of IIR filters in the Control System of AMB
磁力軸承控制系統中IIR濾波器的設計與實現

4、A CONTROL SYSTEM BASED AN MICROCOMPUTER FOR MOCVD
MOCVD裝置的微機控制

5、The Application of the Open Control System EIC2000
開放控制系統EIC2000應用一例

6、A Distributed Control System Constructed With IBM PC as a Host Processor
以IBM PC為主處理機構成的分布式控制系統

7、The Control System For Flying Shears of Bar Rolling Mill
棒材連軋機切頭飛剪的控制系統

8、HYDRAULIC SCREWDOWN CONTROL SYSTEM OF MANDREL PIPE MILL
連軋管機液壓壓下控制系統

9、The Application of Distributed Control System FB-2000 in NaOH vapour
集散控制系統FB—2000在燒堿蒸發中的應用

10、A Microcomputer Control System of the CF-I-type Industrial Robot
CF—Ⅰ型工業機器人的微機控制系統

11、The thesis mainly designs and implements the control system of photoelectric sorter.
本文主要對光電分選機的控制系統進行設計與實現。

12、A New Network Measurement and Control System Based on ADS Technology
基于ADS技術的新型網絡測控系統

13、Mainly introduce the strip catenary control system of the Cold Rolling Mill Plant.
主要對冷軋退火涂層機組中的帶鋼垂度控制系統進行了介紹。

14、A Closed Loop Control System with PDP-11 Computer for MNSR
用PDP-11閉環控制微型堆的初步研究

15、The Simulation of pH Value Control System in Waste Water Neutralization
廢水中和PH值控制系統仿真

16、Remote Control System of Heater Based on XML-RPC
基于XML-RPC的遠程加熱爐控制系統

17、Introducing Siemens Process Control System T-XP, PCS7
西門子過程控制系統T-XP和PCS7簡介

18、Design and Application of Digital Control System Towards HMI
人機交互數字化測控系統的設計與應用

19、Automatic control system of finishing bar mill
棒材精軋機組的自動控制系統

20、The Research on the PC Control System in the Magnetic Bush Press
磁瓦壓力機 PC 自動控制系統

21、The paper introduces the function of PLC in the automatic control system of pumping station.
介紹了可編程序邏輯控制器（PLC）在輸油泵站自動控制系統中的作用。

22、The Integrated Control System of High-power EFA
大功率電弧爐智能控制系統

23、A CONTROL SYSTEM OF HIGH-PERFORMANCE MACHINES IN MINES
用于礦井提升機的一種高性能循環變頻器控制系統

24、The Digital Control System of Hoist Emergency Braking Based on IPC
基于工控機的提升機緊急制動數字控制系統

25、FCS2000 is a general integrity control system based on SCADA
FCS2000現場總線控制系統是一種建立在SCADA基礎上的通用綜合性控制系統。

26、Does an internal control system exist?
是否存在內部控制系統？

27、Research on CMM Control System Based on USB-bus
基于USB總線的三坐標測量機控制系統研究

28、Application of DEB Coordinated Control System in Thermal Power plants
DEB協調控制策略在火電廠的應用

29、This paper introduces an automatic control system with PLC for pulse vacuum steam sterilizer.
本文介紹一種以可編程控制器為主控單元的脈動真空蒸汽滅菌器的電氣控制系統。

30、The control system had been put into using presently and achieved anticipative effect.
目前，該系統已經投入實際應用，并取得了預期的效果。

control system翻譯