1、Weld Shape Evaluation and Metallographic Examination of ERW Pipes
ERW直縫焊管焊縫形態與金相檢驗評價

2、We used to weld pipes with direct. C are welder a. C. Welder.
我們總是用直流(交換)電弧焊機焊吸收子。

3、Lasers, however, can be aimed to weld a join from a distance.
然而，激光可以遠距離的對準焊接點。

4、The government can weld the nation together to face the difficulties ahead.
政府能把全國人民團結在一起，面對前面的困難。

5、Use the grinding wheel or other tools to shovel the weld and remove the tracks.
可用砂輪或其他工具鏟開焊縫與拆卸軌道。

6、The crisis helped to weld the party together.
這場危機促使整個黨緊密地團結在一起。

7、Some opinions about brittle fracture, gray spot and impurities in the weld are proposed.
對焊縫缺陷脆性斷口、灰斑、夾雜物提出了見解。

8、Welders operate welding equipment to weld ferrous and non-ferrous metals.
焊工操作焊接設備焊接亞鐵金屬和有色金屬。

9、Therefore, the weld joint is the most significant point in the weld-quality-controlling.
因此，該處對于焊接質量的控制就成為很重要的位置。

10、In extreme instances, the contacts may weld together.
極端情況下，觸點會焊接在一起。

11、Weld a bunch of untrained recruits into an efficient fighting force.
把未經訓練的一群新兵組織成有戰斗力的部隊。

12、Abstract: A cavity is made on both sides of weld bead
文摘:在焊道表面兩側作一空腔。

13、STUDY ON WELD HOT CRACKING SENSITIVITY IN CAST SUPERALLOYS K6C AND K18
K6C、K18鑄造高溫合金焊接熱裂紋敏感性的研究

14、On-line Clearance Equip of Burr for High Frequency Weld Steel Tube(ERW)
機械式直縫焊管內毛刺清除裝置

15、Influence of the relative width of weld metal and strength of weld metal wes researched.
研究了焊縫金屬相對寬度和焊縫金屬強度對接頭性能的影響。

16、It takes speed and skill to weld steel at this heat.
在這樣的溫度下焊鋼需要速度和技術。

17、Comparison of JB4730－94 and ASME Code on Ultrasonic Inspection of Weld Seam
JB4730-94標準與ASME規范在焊縫超聲波探傷上的對比

18、We now know that this weld contains more than 10 percent ferrite but less than 20 percent.
現在，我們知道了該焊料的鐵素體含量大于10%但小于20%。

19、SOME PROBLEMS OF WELD QUALITY TEST OF SPACE FRAMES WITH HOLLOW BALL JOINT
關于空心球節點網架焊縫質量檢驗的幾個問題

20、A beam of light produced by a laser can weld metals.
激光器發生的光束可以焊接金屬。

21、Once the assembly is situated and held in place, weld it as shown below.
一旦大會和地點是位于舉行，焊接它如下所示。

22、INFLUENCE OF Hf ON WELD CRACKING FOR CAST NICKEL BASE SUPERALLOYS
鉿對鑄造鎳基高溫合金焊接裂紋的影響

23、Weld scene deviation should allow the group to meet clearance norms.
現場焊縫組對間隙的允許偏差應符合規范的規定。

24、The eventual aim is for Weld to use around 1k per bean.
對于Weld來說，最終的目標是讓每個bean占據1k內存空間。

25、Conception and classification of weld workpiece feature were introduced.
提出了焊接工件特征的概念和分類。

26、The main purpose of studying welding technology AC pulsed MIG is used to weld splint.
研究交流脈沖MIG焊接工藝的主要目的是為了焊接薄板。

27、Secure the mounts and weld them using a 1 "bead on each side."
安全和焊接他們的坐騎使用1“方珠每個?！?/p>

28、Look at every panel join on this Ibiza and there's a continuous line of weld along each one.
看看每個小組參加關于這一伊維薩和有一個不斷線沿線的每一個焊縫。

29、Place identical weld beads on the opposite side of the gusset.
扣板相同的地點對面焊珠的。

30、THE NUMERICAL SIMULATION OF THE STRESS FIELD OF WHITE IRON WELD REPAIR
白口鑄鐵焊補應力場的數值模擬

weld翻譯

n. 焊接處, 焊接vt. 焊接, 使密接, 使結合, 使成整體vi. 焊牢【電】 熔接 詳情