1、For me, the lathe is very important.
對我來說，車床是非常重要的。

2、He took the skulls and put them in the lathe and turned them till they were round.
他把頭骨放在車床上轉動，直到它們變圓。

3、The lathe should be set on a frim base.
車床應安裝在堅實的底座上。

4、Improvement for Main Arbor Assembly of Type C6031B Face Lathe Tailstock
C6031B落地車床尾座主軸組的改進

5、Rational design of the structure of body of lathe bed
車床床身結構的合理化設計

6、No lathe can work such high-precision tools.
沒有一部車床能加工這種高度精密的工具。

7、lathe a steel rod
用車床加工一根鋼棒

8、This lathe is easy to operate.
這臺機床容易操作。

9、adjustable jaws center workpiece in a lathe or center tool in a drill
在車床或鉆孔機中心工具內的可調整中心工件。

10、Economical Lathe CNC System Based on Half Closed Loop Controlling
經濟型半閉環車床數控系統

11、A TESTER FOR LATHE STATIC RIGIDITY AND ITS CAT SYSTEM
車床靜剛度儀及其CAT系統

12、On the Methods of the Plane Adjustment of Fitting Frame Lathe Bed Base
框架式床身底座安裝水平調整方法的探討

13、Maybe you want to build the Gingery lathe or cast some artistic sculptures.
也許你想建立的金格里車床或投一些藝術雕塑。

14、The lathe should be set on a frim base
車床應安裝在堅實的底座上。

15、An engine lathe consists of a number of parts.
普通車床由若干部件組成。

16、The work or workshop of a lathe operator.
車削工作，車削車間操作車床的人的工作或工作間

17、The paper deals mainly with the study of rational structure of a lathe bed by model tests.
本文主要論述運用模型試驗來研究車床床身的合理結構。

18、The mandrel must be mounted between centers and a drive plate and lathe dog must be used.
必須將心軸錨定在中心點和驅動板之間的位置，并且必須使用車床軋頭。

19、Improvement of Quality of Lathe Bed Casting by Vibration Ageing
應用振動時效技術提高床身鑄件質量

20、A lateral movement, as of a lathe tool across a piece of wood
橫動橫向運動，如車床切割工具穿過一塊木頭

21、Client: Can you tell me some of your CNC Lathe models do?
客戶：您可以告訴我貴公司數控車床的一些型號嗎？

22、The movement and operation mode of hand wheel of CNC lathe were researched.
針對數控車床的手輪移動操作方式進行研究。

23、The lathe bed is made of cast iron.
車床的床身是用鑄鐵做的。

24、Tools and lathe tools do not put in the bed, lest knock on bad guide.
工具和車刀不要放在床面上，以免敲壞導軌。

25、Spindle box medium is the key parts of the lathe spindle.
主軸箱中等主軸是車床的關鍵零件。

26、Analysis on Dynamics of Bed Structure for CNC Lathe CK1416
CK1416型數控車床床身結構動態分析

27、Design of Lathe Fixture for Pin Machining
銷軸加工車夾具設計

28、The lathe should be set on a firm base.
車床應安裝在堅實的底座上。

29、Simulation Method of NC Lathe Based on AutoCAD
基于AutoCAD平臺的數控車削模擬

30、Machining Process Improvement for Lathe Bed Surface of M, K and H
車床床身M面、H面、K面加工工藝的改進

lathe翻譯

n. 車床vt. 用車床加工【醫】 車床 詳情