1、The former are used for point-to-point messaging and the latter in publish-subscribe scenarios.
前者用于點對點消息，后者用于發布-訂閱場景。

2、A point-to-point channel reserved for use by a single leasing customer.
由一個租用客戶單獨使用的一種點到點的信道。

3、The point-to-point scenario detailed in this section USES three applications, as shown in Figure 2.
在這個部分中詳細描述的點到點場景使用了三個應用程序，如圖2所示。

4、This type of point-to-point connection nightmare is shown in Figure 2.
這種點到點連接被公開的糟糕情況如圖2 中所示。

5、Create a client application for the point-to-point messaging model.
創建點對點消息模型的客戶端應用程序。

6、It helps overcome many of the shortcomings associated with point-to-point connections.
它有助于克服與點到點連接有關的許多缺點。

7、This enables point-to-point messaging support.
這將啟用點到點消息傳遞支持。

8、SSL is a point-to-point protocol that secures direct connections between hosts.
SSL是一種保護主機間直接連接的點對點協議。

9、The most fundamental improvement is the adoption of point-to-point bus topology.
最基礎的提高是它采用了點到點的總線結構。

10、Note that the notion of point-to-point communication is not a feature of SOA itself.
請注意，點到點通信的概念并不是SOA本身的特征。

11、Point-to-point unicast messages have been conventionally used to achieve barrier synchronization.
過去一直用點對點單點傳送信息取得屏蔽同步。

12、Current point-to-point information integration does not easily lead to IT asset reuse.
當前的點對點信息集成不容易導致IT資產的復用。

13、Avoid point-to-point invocation.
避免點到點調用。

14、Unlike RMM, RUDP is a point-to-point protocol in which messages are sent to a specific destination.
與RMM 不同的是，RUDP 是一個 “點對點”協議：消息被發送到一個特定目標。

15、Example of scenario for point-to-point messaging model.
點到點消息傳送模型的場景示例。

16、The most common pitfall in this area is to employ point-to-point service invocation.
在此領域最常見的失誤是采用點到點調用。

17、A point-to-point channel reserved for use by a single leasing customer
由一個租用客戶單獨使用的一種點到點的信道。

18、Application scenario for the point-to-point messaging model.
點對點消息模型的應用場景。

19、But, more importantly, the WebSphere MQ cluster does not displace the point-to-point network.
但是，更重要的是WebSphereMQ集群沒有取代點對點網絡。

20、There are two basic of control systems in numerical control: point-to-point and contouring.
在數控機床中有兩種基本控制系統，分別是點對點和線性。

21、HTTP and its security mechanisms only address point-to-point security.
HTTP及其安全機制僅能解決點到點的安全問題。

22、Connecting JMS pub/sub and point-to-point networks
連接JMS發布/訂閱和點到點網絡

23、Destinations for point-to-point are queues.
點到點的目的地是隊列。

24、Pattern one: Point-to-point semantic integration.
模式一：點對點語義集成。

25、First you find out how to work with the point-to-point messaging model using queue destinations.
首先，您將了解如何利用隊列目的地來使用點到點消息傳遞模型。

26、R2: Antipattern name: Point-to-point Services
R2：反模式名稱：點到點服務

27、Particularly the author explains Point-to-point protocol realization exhaustively.
特別對點對點協議(PPP)協議的實現做了詳盡闡述。

28、The point-to-point transaction flow may fail in the following scenarios.
在下列情況下，點到點事務流可能失敗。

29、The removal of point-to-point connections should ease the introduction of new business systems.
點對點連接的消除應該可以簡化引入新業務系統的工作。

30、However, point-to-point integration is not necessarily a bad thing.
盡管如此，點對點集成不一定就是壞事。

point-to-point翻譯